Fujitsu General Partner
Air Conditioners News & Events Case Studies Contacts Info Request Register



Fujitsu has added new three-phase power supply air conditioners to its wall-mounted and ceiling-mounted ranges.

There are two models in the wall-mounted range, the ASY30A(3) providing 8.2kW of cooling and the ASY30R(3), the reverse heat pump version supplying 8.0kW of cooling and 8.8kW of heating. In the ceiling-mounted range are the ABY54A(3) with 14.6kW of cooling and the ABY54R(3) reverse heat pump model providing 14.6kW of cooling and 15.8kW of heating. Plus Fujitsu has added the single-phase ABY30A (8.8kW of cooling) and the ABY30R (8.8kW of cooling and 9.1kW of heating).

These additions mean that the customer now has a total of 19 models in the wall-mounted range to choose from and eight ceiling-mounted units.

Renowned for its modern, compact styling, the larger wall unit measures a neat 1250mm wide by 320mm high by 195mm deep, with the ceiling-mounted units at 1660mm wide by 240mm high by 700mm deep. New features on the ceiling-mounted models include a fresh air intake facility together with a standard gravity condensate drain or the option of the Fujitsu pumped system allowing the installer the flexibility of an alternative piping route.

Conditioned air is evenly distributed throughout the room via the unit's double (horizontal and vertical) airflow pattern, which automatically adjusts to match changes in room temperature. Similarly, the airflow volume is also regulated for maximum occupancy comfort via the unit's on-board microprocessor intelligence.

On reaching setpoint the Energy Save routine allows the room temperature to rise by two degrees in the cooling mode and fall four degrees when in the heating mode, at a rate of one degree per hour. The result is valuable energy savings without the occupants experiencing a marked change in room temperature.

The reverse heat pump models have Auto-Changeover as standard, which allows the unit to automatically switch between the heating and cooling modes in order to maintain the pre-programmed temperature setting.

Contact Fujitsu General on airconsales@fujitsu-general.co.uk or 020 8421 7000.

Back to top
Back to news index